EM Scanner - YIC Technologies

High speed 8GHz Real-time EMC and EMI diagnostic tool on your lab-bench

Authorized Distributor

YIC Technologies Logo
YIC EM Scanner
GW Instek

2024 Spring Sale 10% Off

IN STOCK & READY TO SHIP

Contact us today!

GW Instek

N9020A MXA Signal Analyzer

Accelerate the Development of Wireless Devices with the Speed, Performance & Applications to Adapt to Evolving Test Requirements

Keysight Technologies Logo
N9020A MXA Signal Analyzer

SM200B Spectrum Analyzer

The High Performance SM200B From Signal Hound: High Performance Speed, Accuracy, Security, and Agility Meet Very Low Cost

Signal Hound Logo

Trust Your Equipment to Our World Class Repair Lab

  • Huge Parts Inventory in Stock
  • Free Repair Evaluations
  • Fast Service Turnaround
  • World Class 67GHz Enabled Lab
  • Military PMEL Graduate Staff

Ask Us About Our Repair Warranty!

Manufacturers

Testimonials

  • ★★★★★

    "Fantastic deal. The oscilloscope is in very good condition. Packed for shipment to survive anything"
    Jeff
  • ★★★★★

    "Premium equipment. Excellent communication. Fast. Best value!"
    Avi
  • ★★★★★

    "Practically in new condition"
    Darcy
  • ★★★★★

    "There was a small issue; The people at BRL Test were 100% responsive and issue resolved. Thanks!"
    Mike
  • ★★★★★

    "Best packing ever! I would let you ship one of my children!"
    Todd
  • ★★★★★

    "Unit received in great shape. Passed Agilent calibration. Good job!!"
    Lee
  • ★★★★★

    "In every aspect these guys are great!"
    Sarah

Join our Newsletter

9250 - Tabor Electronics Amplifiers


Get Quote

  • Model: 9250
  • Manufactured by: Tabor Electronics
  • Frequency Range - High: 15.00MHz
  • Output - Compression: n/a
  • Gain: n/a
  • Extra Specifications: Differential / Dual-Channel Wideband Amplifier
Do you have a 9250 you want to sell?
We buy used equipment!
Learn More

Tabor Electronics 9250 Overview

The 9250 is a bench-top, 2U, half 19” rack size, fully metal case dual channel amplifier. The instrument can be configured to be used as two, single-ended independent channels, or as a one input with two differential outputs.

The inputs to the amplifiers be configured to match different source impedances such as 50W, 75W, or 1MW and the outputs can be configured to match different load impedances such as 50W, 75W, or 600W. There are three inputs for each channel.

The outputs are located on the front panel. There are two outputs, one for each channel. When the 9250 is configured as two separate amplifiers, the outputs generate amplified signals within the range of 40Vp-p into open circuit or 20Vp-p into matching load impedance. The bandwidth of the outputs is around 20MHz for large signals. Small signal bandwidth can reach 50MHz.

The 9250 can be configured as a differential amplifier. In this case, the channel 2 input is disabled and channel 1 input is amplified and distributed differentially to both outputs. In this case, channel 1 output generates in-phase signal while channel 2 outputs an inverted signal that has exactly 180 phase offset to the normal output. Full amplitude and bandwidth is preserved when the 9250 operates in differential mode. The output impedance of the differential outputs is modified to 25W, 37.5W, or 300W for differential drive of 50W, 75W, or 600W loads. Using the differential mode, the 9250 does not sacrifice accuracy, nor does it sacrifice bandwidth.

The 9250 has two additional inputs for each channel allowing summation of two signals and providing an external control of DC level offset. These inputs are accessible from the rear panel only.

  • Large signal bandwidth to 15 MHz
  • Small signal bandwidth to 30 MHz
  • High amplitude to 40Vp-p (into high impedance)
  • Slew rate to 200V/µs
  • Low distortion
  • Custom Configuration of: Gain, Input impedance, Output impedance, Output configuration
iso9001 Calibration

Calibration & Test Equipment Repair

The BRL Test Lab offers in-house ISO9001:2015 compliant calibration to its end users and industry professionals with precision accuracy, fast turn-around times, and a seamless customer experience.
 Learn More 
Your IP Address is: 3.86.235.207