USB-4065 - National Instruments Digital Multimeters

National Instruments USB-4065 Overview

The National Instruments USB-4065 bus-powered digital multimeter (DMM) for USB offers 6½-digit performance in a small, lightweight form factor. Its highly portable architecture is ideal for use in field monitoring and OEM applications as well as for saving space in the laboratory.

The NI USB-4065 provides 6½ digits of resolution at up to 10 readings per second and up to 3,000 readings per second at lower resolutions. With ±300 VDC/Vrms of isolation, current measurements up to 3 A, and 2- or 4-wire resistance measurements, the USB-4065 DMM delivers a complete solution for basic 6½-digit measurement needs.

Integration with Switching
You can easily integrate NI 4065 DMMs with stand-alone switching using the 4- or 12-slot USB Switch Mainframes from National Instruments. You can configure these switch systems, controllable from any available USB port on a PC or laptop computer, with more than 50 available SCXI switch topologies. Switching offers a simple method of channel expansion for data-logging systems based on NI 4065 DMMs.

This portable USB DMM complements the NI 4065 line of 6½-digit DMMs offered in the PCI, PCI Express, and PXI form factors. For higher-performance requirements, consider NI PXI-407x FlexDMM devices, which provide up to 7½ digits of resolution as well as LCR capability.

• Bus-powered for portability
• Small (7.0 by 4.1 by 1.3 in.) and lightweight (10 oz)
• 6½-digit resolution
• 7 built-in measurements - AC/DC voltage, AC/DC current, 2- or 4-wire resistance, and diode test
• ±300 VDC/Vrms isolation
• 3000 readings/s (maximum) at 4½ digits