EM Scanner - YIC Technologies

High speed 8GHz Real-time EMC and EMI diagnostic tool on your lab-bench

Authorized Distributor

YIC Technologies Logo
YIC EM Scanner
GW Instek

2024 Spring Sale 10% Off

IN STOCK & READY TO SHIP

Contact us today!

GW Instek

N9020A MXA Signal Analyzer

Accelerate the Development of Wireless Devices with the Speed, Performance & Applications to Adapt to Evolving Test Requirements

Keysight Technologies Logo
N9020A MXA Signal Analyzer

SM200B Spectrum Analyzer

The High Performance SM200B From Signal Hound: High Performance Speed, Accuracy, Security, and Agility Meet Very Low Cost

Signal Hound Logo

Trust Your Equipment to Our World Class Repair Lab

  • Huge Parts Inventory in Stock
  • Free Repair Evaluations
  • Fast Service Turnaround
  • World Class 67GHz Enabled Lab
  • Military PMEL Graduate Staff

Ask Us About Our Repair Warranty!

Manufacturers

Testimonials

  • ★★★★★

    "Fantastic deal. The oscilloscope is in very good condition. Packed for shipment to survive anything"
    Jeff
  • ★★★★★

    "Premium equipment. Excellent communication. Fast. Best value!"
    Avi
  • ★★★★★

    "Practically in new condition"
    Darcy
  • ★★★★★

    "There was a small issue; The people at BRL Test were 100% responsive and issue resolved. Thanks!"
    Mike
  • ★★★★★

    "Best packing ever! I would let you ship one of my children!"
    Todd
  • ★★★★★

    "Unit received in great shape. Passed Agilent calibration. Good job!!"
    Lee
  • ★★★★★

    "In every aspect these guys are great!"
    Sarah

Join our Newsletter

FR - Laurel Electronics Phase Meters


Get Quote

  • Model: FR
  • Manufactured by: Laurel Electronics
  • High end frequency limit: 10kHz
  • Accuracy: 0.01_
  • Resolution: 0.01_
  • Extra Specifications: Phase Angle Meter
Do you have a FR you want to sell?
We buy used equipment!
Learn More

Laurel Electronics FR Overview

Phase angle indicates the lead or lag in degrees from 0º to 360º between two periodic signals having the same period. In the illustration to the right, phase angle is 360*P1/P. The signals are applied to the A and B input channels.

Phase angle measurement is commonly used with AC power from 50 Hz to 400 Hz. Phase angle needs to be set to zero to synchronize AC generators. It also applies to the triggering of SCRs and Triacs for power control. The phase angle between AC current and voltage determines power factor. The Laureate phase angle meter provides exceptionally fast response and high accuracy for low frequencies, such as AC line frequency.

Phase angle measurement with the Laureate™ Phase Meter requires that two signals with identical periods be applied to Channels A and B. A display from -180º to +180º is obtained by timing the rising edge of one channel and the falling edge of the other channel, and programming a 180º offset. A resolution of 1º, 0.1º or 0.01º is selectable. Accuracy is 0.01% up to 100 Hz, 0.1% at 1 kHz, and 1% at 10 kHz.

Phase angle is determined by timing crystal clock pulses over a specified gate time which is selectable from 10 ms to 199.99 s. By selecting the minimum gate time of 10 ms, the update rate can be up to 20/s for 50/60 Hz AC line frequency. Improved accuracy is obtained by making the gate time long enough so that multiple cycles can be averaged.

  • Measures phase angle between two waveshapes of similar period
  • Resolution of 1º, 0.1º or 0.01º
  • .01% accuracy at AC line frequency
  • Inputs from NPN or PNP proximity switches, contact closures, digital logic, magnetic pickups down to 12 mV, or AC inputs up to 250 Vac.
  • Trigger on positive or negative pulse edges
  • Frequency from .005 Hz to 10 kHz
  • 6-digit red or green LED display
  • Isolated 5, 10 or 24 Vdc excitation output to power sensors
  • Uses Standard counter main board and FR signal conditioner
  • Choice of isolated plug-in options for control and computer interface:
    dual relays, analog output, serial communications, parallel BCD output, low voltage AC & DC power
  • NEMA 4X, 1/8 DIN case
  • Safety certified to UL 61010C-1 (UL mark)
  • EM certified to EN 61010-1 (CE mark)
iso9001 Calibration

Calibration & Test Equipment Repair

The BRL Test Lab offers in-house ISO9001:2015 compliant calibration to its end users and industry professionals with precision accuracy, fast turn-around times, and a seamless customer experience.
 Learn More 
Your IP Address is: 3.92.1.156