PVD-T Series - 6kW Type - Kikusui Power Supplies DC





Request a Quotation
















No Substitutes

Add me to your email list for monthly specials.
(private list no 3rd party use)
Technical Specifications

Max. Voltage
600.0V

Number of Outputs
Multiple

Max. Current
600.00A

Extra Specifications
Variable-switching Regulated DC Power Supply(CV/CC)


Product Description

The PVD-T Series power supplies are variable-output switching DC power supplies, with wide-range constant-voltage (CV) and constant-current (CC) outputs that enable the setting of a constant power output.
The PVD-T series power supplies are available in 6 kW/12 kW versions, all of which are 19-inch rack-mountable and approximately 130 mm/260 mm in height. In addition to their excellent space factors, the PVD-T series offerd not only the advantages of a switching system and the output quality of a series regulator, but also implements a large reduction in running costs (power consumption) - traditionally a problem with large capacity DC power supplies.

PVD-T Series - 6kW Type Lineup:

  • PVD10-600T 0 to 10V / 0 to 600A, AC 3 Phase input
  • PVD20-300T 0 to 20V / 0 to 300A, AC 3 Phase input
  • PVD40-150T 0 to 40V / 0 to 150A, AC 3 Phase input
  • PVD60-100T 0 to 60V / 0 to 100A, AC 3 Phase input
  • PVD80-75T 0 to 80V / 0 to 75A, AC 3 Phase input
  • PVD100-60T 0 to 100V / 0 to 60A, AC 3 Phase input
  • PVD150-40T 0 to 150V / 0 to 40A, AC 3 Phase input
  • PVD300-20T 0 to 300V / 0 to 20A, AC 3 Phase input
  • PVD600-10T 0 to 600V / 0 to 10A, AC 3 Phase input

With its soft switching technology, the PVD-T series provides greater efficiency and a low noise level very close to that of a series regulator.
The PVD-T series also features a power factor of 0.95 (typical) with a power-factor improvement circuit to suppress harmonic currents.
The PVD-T series features analog remote control, circuit protection, an output/status monitor, and a programmable output sequencer. The programmable output sequencer supports the setting and storing of ten programs (maximum number of steps per program: 99) from the operation panel. In addition, up to five units of the same model, provided they have a GPIB or multi-channel interface card installed (one master and four slaves), can be connected with current sharing operation via the built-in control bus.
The PVD-T series power supplies are "next-generation digital power sources," that are ideal for aging, measurement, or providing control to a wide range of electronic devices.

  • Advanced soft-switching technology
  • Noise characteristics very similar to those of a series regulator
  • High voltage (600V), high-current (6kW/600A or 12kW/1200A) output
  • Fast transient response of 3ms (6-kW models only)
  • Large 6-kW capacity in low-profile (approximately 130mm in height) cabinets that can be 19-inch rack-mounted
  • 32-bit full-digital control system
  • Output sequencer supports the storing of ten programs, each of up to 99 steps
  • Efficiency of approximately 90%, which helps reduce power consumption
  • Power-factor improvement circuit produces power factor of 0.95
  • RS-232C interface equipped as standard, with GPIB available as an option
  • Analog remote control and voltage/current monitoring supported
  • Extendable up to 30kW(3000A)/60kW(6000A) with current sharing parallel operation
  • Conforms to UL, CSA, FCC, and CE standards