AVR-G3-B - Avtech Electrosystems Ltd. Pulse Generators





Request a Quotation
















No Substitutes

Add me to your email list for monthly specials.
(private list no 3rd party use)
Technical Specifications

Max. V(out)
220.0V

Channels
1

Max. Pulse Rep. Freq.
5.00kHz

Extra Specifications
High Voltage Pulser


Product Description

The AVR-G series is specifically designed for gating and beam blanking applications requiring amplitudes up to ± 250 Volts, pulse widths from 100 ns to 0.5 sec and duty cycles as high as 50%.
This series is designed to drive high impedance loads such as microchannel plates, grids and beam deflection plates. It should be noted that the versatile AVR-G technology can be readily adapted to provide a wide variety of other waveforms (e.g., higher voltages, dual outputs, alternating polarity, etc).
Model AVR-G3-B provides a positive output pulse followed by a negative pulse. The amplitudes and pulse widths for the two pulses are independently variable (from 0 to 220 Volts and 1 us to 10 ms respectively) and the delay between the pulse is variable as well from about 50 ns to one-half of the PRF period.
For all models, the pulse repetition frequency is variable using the internal clock oscillator. A delay control and a sync output are provided for scope triggering purposes. The units can also be triggered externally using a TTL-level pulse. A manual push button is provided for one shot operation.
All models with the “-B” suffix include a complete computer control interface. This
provides GPIB and RS-232 computer-control, as well as front panel keypad and adjust knob control of the output pulse parameters. A large back-lit LCD displays the output amplitude, polarity, frequency, pulse width or duty cycle as appropriate, and delay.