MI.4030 - Spectrum Transient Recorders Digitizers

MI.4030 Spec Sheet



Request a Quotation
















No Substitutes

Add me to your email list for monthly specials.
(private list no 3rd party use)
Technical Specifications

Max Sample Rate
50MSa/sec

Channels
1

Resolution
14 bits

Extra Specifications
Transient Recorder


Product Description

The MI.40xx (incl. MI4030 - Transient Recorder ) is best suitable for applications that need high sampling rates as well as a maximum signal dynamic. These boards offer a resolution 4 times higher than 12 bit boards. On the MI.40xx every channel has its own amplifier and A/D converter.

Each input channel could be adapted to a wide variety of signal sources. This is done by software selecting a matching input range, an input impedance and an individual input offset. The user will easily find a matching solution from the six offered models. These versions are working with sampling rates of 20 MS/s or 50 MS/s and have one, two or four channels and could also be updated to a multi-channel system using the internal synchronization bus.

Data is written in the internal 8 MSamples up to 256 MSample large memory. This memory could also be used as a FIFO buffer. In FIFO mode data could be transferred on-line directly into the PC RAM or to hard disk.

  • 14 bit transient recorder
  • One channel with 50 MS/s
  • High dynamic range
  • Up to 256 MSample memory
  • 6 input ranges between ±200 mV and ±10 V
  • FIFO mode up to 50 MS/s sum samplerate
  • Input offset up to ±200%
  • Automatic offset calibration
  • Synchronisation to multi-board system possible
  • 32 Bit PCI interface
  • Compatible with 3,3V and 5V PCI I/O-Voltage