Com-Power CDN-AF2E is a part of the series of Coupling/Decoupling Networks designed specifically for testing product for conducted immunity per IEC/EN 61000-4-6. For testing products that uses two wire unscreened cables for data communication. It has eight 2 mm shrouded banana sockets for both EUT and AE power connection. The CDN-AF2E can handle up to 5 Amps of current. The RF disturbance signal coupling port is female BNC. It can handle up to 40V of RF Input Voltage. The bottom surface of the CDN is not painted for easy and effective grounding. All Com-Power CDNs are individually calibrated. The Com-Power CDN-AF2E fully complies with the requirements contained in the IEC 61000-4-6 and CISPR 16-1-2. All Com-Power CDNs can be purchased separately or as part of the CIS series conducted immunity test system. This is a pre-packaged solution that includes an ACS series power amplifier and all accessories required for the test.
BRL Test is your EMC-EMI Headquarters.
Product Name: Coupling Decoupling Network (CDN)Compliant Test Standards: IEC / EN 61000-4-6Application: Two wire unscreened, unbalanced CablesFrequency Range: 150 kHz to 230 MHzRF Input Voltage: 40 V (Max)RF Input Connector: 50 Ω BNC (Female)Voltage Rating: 310 V AC / 440 V DC (Line to Ground)Current Rating: 5 Amp (Max)AE and EUT Connections: 2 mm shrouded banana socketsCommon Mode Impedance:150 kHz - 26 MHz: 150Ω ± 20Ω26 MHz - 80 MHz: 150Ω + 60Ω / ? 45Ω80 MHz - 230 MHz: 150Ω + 60Ω / ? 60ΩVoltage Division Factor: 9.5 dB +3 / -1Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)Dimensions: 6 x 6 x 13 inches or 15.2 x 15.2 x 33 cmWeight: 5 lbs. or 2.3 kgAccessories Available from Com-Power for setting test levels and running the test:ADA-AF2E shorting adaptersADA-515-2 150 Ω to 50 Ω adaptersTEP-050 50 Ω TerminatorATTN-6-100W Power AttenuatorDCU-300-100W Directional CouplerASC series Power Amplifiers