EM Scanner - YIC Technologies

High speed 8GHz Real-time EMC and EMI diagnostic tool on your lab-bench

Authorized Distributor

YIC Technologies Logo
YIC EM Scanner
GW Instek

2024 Spring Sale 10% Off

IN STOCK & READY TO SHIP

Contact us today!

GW Instek

N9020A MXA Signal Analyzer

Accelerate the Development of Wireless Devices with the Speed, Performance & Applications to Adapt to Evolving Test Requirements

Keysight Technologies Logo
N9020A MXA Signal Analyzer

SM200B Spectrum Analyzer

The High Performance SM200B From Signal Hound: High Performance Speed, Accuracy, Security, and Agility Meet Very Low Cost

Signal Hound Logo

Trust Your Equipment to Our World Class Repair Lab

  • Huge Parts Inventory in Stock
  • Free Repair Evaluations
  • Fast Service Turnaround
  • World Class 67GHz Enabled Lab
  • Military PMEL Graduate Staff

Ask Us About Our Repair Warranty!

Manufacturers

Testimonials

  • ★★★★★

    "Fantastic deal. The oscilloscope is in very good condition. Packed for shipment to survive anything"
    Jeff
  • ★★★★★

    "Premium equipment. Excellent communication. Fast. Best value!"
    Avi
  • ★★★★★

    "Practically in new condition"
    Darcy
  • ★★★★★

    "There was a small issue; The people at BRL Test were 100% responsive and issue resolved. Thanks!"
    Mike
  • ★★★★★

    "Best packing ever! I would let you ship one of my children!"
    Todd
  • ★★★★★

    "Unit received in great shape. Passed Agilent calibration. Good job!!"
    Lee
  • ★★★★★

    "In every aspect these guys are great!"
    Sarah

Join our Newsletter

AHA-840 - Com-Power Antennas

$11,580.00

 
Do you have a AHA-840 you want to sell?
We buy used equipment!
Learn More

Com-Power AHA-840 Overview

Com-Power AHA-840

BRL Test is your authorized Com-Power distributer
  • Broadband - 18 GHz to 40 GHz
  • Built-in Preamplifier Increases Sensitivity
  • Low Antenna Factor
  • Emissions & Immunity Capability
  • Individual Calibration Included
The Com-Power AHA-840 Active Horn Antenna is part of Com-Power?s extensive line of EMC test antennas. The AHA-840 smartly incorporates a broadband, double ridged waveguide horn antenna with precision waveguide to coaxial adapter (meticulously tuned as a set for optimum VSWR performance and impedance matching) and a broadband, high-gain, lownoise preamplifier; integrated into a single, well-built, durable, custom designed assembly which facilitates the flexibility to be configured for almost any application. 
Application 
There are many challenges associated with radiated emissions testing in the 18 to 40 GHz frequency range. Most will agree that, after the investment of necessary capital (which is really more of an obstacle than a challenge), the next highest on the list is achieving an acceptable signal to noise ratio to be able to perform the testing accurately. Although, if the initial investment of capital is used wisely, the second challenge can be made to be much less challenging. The AHA-840 Active Horn Antenna can go a long way in this regard. By employing the AHA-840 Active Horn Antenna in conjunction with a set of high-quality, low-loss microwave cables (kept as short as possible), you?ll be able to alleviate most of the challenges others face, and be able to start testing. 
Calibration 
The AHA-840 is individually calibrated at 3 meters distance per the procedures described in ANSI C63.5: 2006, with NIST traceability. In addition to individual calibration of the antenna and preamp/cable, it is also calibrated as a single unit (antenna/preamplifier/cable combined), thereby accounting for any mismatch between components, increasing overall measurement accuracy and decreasing the associated measurement uncertainty. The calibration data and certificate is shipped with each antenna. Recognized ISO 17025 accredited calibration is also available upon request.
Advantages 
The RF connection between the antenna output connector and preamplifi er input is made externally via a short, high quality coaxial cable assembly. The accessibility of these connection points allows the insertion of attenuation pads, band pass filters, notch filters, etc., as needed, between the antenna and preamplifier, which is not possible with other antennas of this type available on the market. This test equipment arrangement, with the placement of the preamplifier near the antenna, rather than next to (or embedded into) the test receiver, increases measurement accuracy by amplifying the received signals prior to being significantly attenuated by the long cable run between the test site and test equipment area. The gain of the preamplifier intentionally increases with frequency at about the same slope as the antenna factor of the horn vs frequency, resulting in a relatively fl at active antenna factor over the frequency range. 
Flexibility 
The AHA-840 can also be easily configured for other applications as well. By adding attenuation between the antenna and preamplifier, or simply bypassing the preamplifier altogether, the antenna can be used for measurements of higher-amplitude signals, where preamplifier saturation becomes more of a concern than signal to noise ratio. This capability gives the AHA-840 an unrivaled dynamic range over which measurements are able to be performed. The antenna can also be used for immunity testing. By removing the waveguide to coaxial adapter and connecting directly, or with a length of fl exible waveguide, to your amplifier?s waveguide output, fi eld strengths up to 1100 V/m @ 1 meter can be achieved with 200 watts input power. With the waveguide to coaxial adapter left in place, fi eld strengths up to 250 V/m @ 1 meter can be achieved with 10 watts input power. AHA840 ComPower
iso9001 Calibration

Calibration & Test Equipment Repair

The BRL Test Lab offers in-house ISO9001:2015 compliant calibration to its end users and industry professionals with precision accuracy, fast turn-around times, and a seamless customer experience.
 Learn More 
Your IP Address is: 3.92.96.247