Electronic Test Equipment

Below Budget - On Time - Above Expectations
Search our test equipment


World Class Repair Lab

Our 67 ghz enabled lab performs free repair evaluations for your equipment.

 Learn More 

Timely Results

Fastest turn around in the industry.

 Learn More 


Join our Newsletter

See the Videos

PP30 - Baker Instruments Hipots

Contact for Quote

  • Model: PP30
  • Manufactured by: Baker Instruments
  • Max. Output AC Voltage: n/a
  • Max. Output DC Voltage: 30.000kV
  • Output AC Current: n/a
  • Output DC Current: 1.0mA
  • Extra Specifications: High Voltage Surge/High Potential Tester
The PP30 Power Supply is a high power impulse generator. It is used to test very large high voltage windings. The output is controlled by a variable transformer from 500 volts up to a maximum of 30,000 volts. The PP30 performs both surge and dc high potential tests when used with the D12000 or AWA as the control and display. It incorporates a supply monitor to insure safe operation from a well grounded supply. In addition, 80kv rated test lead cable is provided The dc high potential test can also be done using the PP30 along with the D12000 or AWA. Test voltage is set by the output control from 500 volts up to 30,000 volts. Current is displayed and an autoranging trip circuit monitors the test. If current exceeds the trip level, the test is automatically halted. In its most sensitive setting, the protective circuit will operate as low as 10 microamps. In addition, the D12000 or AWA also monitors current. This provides a redundant level of safety for the dc high potential test.
Your IP Address is: