BRL Test, Inc.

Electronic Test Equipment

Below Budget - On Time - Above Expectations
Search our test equipment


World Class Repair Lab

Our 67 ghz enabled lab performs free repair evaluations for your equipment.

 Learn More 

Timely Results

Fastest turn around in the industry.

 Learn More 


Join our Newsletter

See the Videos

HT1000DC-50mA - Compliance West Hipots

Get Quote

  • Model: HT1000DC-50mA
  • Manufactured by: Compliance West
  • Max. Output AC Voltage: n/a
  • Max. Output DC Voltage: 1.000kV
  • Output AC Current: n/a
  • Output DC Current: 50.0mA
  • Extra Specifications: Special-Use Hipot Tester

Our HT1000DC-50mA is a DC only tester, with the ability to deliver up to 50mA to the EUT. Leakage current limits can be set with the front panel knob from 2.5mA to 50mA. Normal operation stops testing when a leakage current greater than the set amount or when a dielectric breakdown is encountered. If desired, testing can be set to continue to burn problem areas. Testing will continue until the design current limit of the tester is exceeded; at which time the output voltage will return to zero.

Regarding the ripple current in DC hipot testers, lower ripple requires larger filter capacitors, which store more power that is normally used to smooth the rectified waveform. In the case of a hipot tester, this stored power has the side effect of discharging into the EUT in the event of a failure. In order to keep the power that must be absorbed by the EUT within reasonable limits, we have struck a balance between lower ripple and excessive power. If your requirements dictate lower ripple, please let us know and we can quote accordingly. As a final note, we can build the tester to use 3 phase power to improve ripple and not increase the size of the filter capacitors.

Provided with test leads terminated in alligator clips and a calibration certificate; one year warranty on parts and labor.

Your IP Address is: