Model DV-25V-GC1-02 is a DC dielectric strength tester c/w continuity test, which is ideal for testing equipment with input suppressor which cannot withstand instantaneous high-voltage test. Such equipment may be: computers, electronic ballasts, switching power supplies, high capacitance heater-elements and similar products. The DV-25V-GC1-02 applies the high-voltage starting from zero up to the preset value. It also checks that there is good line-cord ground continuity, otherwise high-voltage test cannot be done for the safety of the operator and because the ground connection of the line-cord is faulty. A special lead c/w a clip and a pin is included for testing equipment with two-pin plug. Also a special two-wire line-cord with two clips and a plug is available as an option for testing equipment or products with terminal block instead of a line-cord.
- 5 Lights (power-on, high-voltage-on, fault, line-fault, and no ground)
- Power on/off switch, fuse, high-voltage on button, high-voltage off button, Reset button, and voltage adjust knob
- One input line-cord, one ground lead c/w a clip, and one removable high-voltage lead c/w a plug on one end to be plugged into either ac or dc high-voltage outlet of the tester, and a retractable high-voltage probe on the other end
- Trip current fixed at 10 mA