Manufacturers
Manufacturers
- ¬ All Categories
- ¬ .26-.99% Accuracy
- ¬ 0-1 kHz
- ¬ 0-1.1 MHz
- ¬ 0-150 MHz
- ¬ 0-20 MHz
- ¬ 0-255 MHz
- ¬ 0-39 MSa/Sec
- ¬ 0-5 V
- ¬ 1-1.5 GHz
- ¬ 1-1.5 GHz
- ¬ 1-100 MHz
- ¬ 1-20 MHz
- ¬ 1.0 kV
- ¬ 1.0-2.0% Accuracy
- ¬ 1.01-1.99 GHz
- ¬ 1.1kA-99.9mA
- ¬ 1.6-2.5 GHz
- ¬ 1.6-3 GHz
- ¬ 10 MHz
- ¬ 100 kHz
- ¬ 100 MHz - 2 Channel
- ¬ 100.1-275 MHz
- ¬ 1kA
- ¬ 2-16 kHz
- ¬ 2-2.1 MHz
- ¬ 2.6-2.99 GHz
- ¬ 20-25 MHz
- ¬ 20.1-40 Mhz
- ¬ 200 MHz
- ¬ 200-999 MSa/Sec
- ¬ 200.0A-300.0A
- ¬ 250-300 MHz
- ¬ 3-4 MHz
- ¬ 3.5-6.7 GHz
- ¬ 30-100 MHz
- ¬ 30-240 MHz
- ¬ 330-500 V
- ¬ 4.0-9.0 GHz
- ¬ 40-50 MHz
- ¬ 40.1-70 MHz
- ¬ 5-7 MHz
- ¬ 500 MHz-25.50 GHz
- ¬ 500.0A-600.0A
- ¬ 60-80 MHz
- ¬ 70.1-100 MHz
- ¬ Dual 5-30 V
- ¬ Miscellaneous
- ¬ Single 16-20 V
- ¬ Single 30-32 V
- ¬ Single 33-40 V
- ¬ Single 48-60 V
- ¬ Triple 32-300 V
- ¬ Triple 5-30 V
Testimonials
-
★★★★★
"Fantastic deal. The oscilloscope is in very good condition. Packed for shipment to survive anything"Jeff
-
★★★★★
"Premium equipment. Excellent communication. Fast. Best value!"Avi
-
★★★★★
"Practically in new condition"Darcy
-
★★★★★
"There was a small issue; The people at BRL Test were 100% responsive and issue resolved. Thanks!"Mike
-
★★★★★
"Best packing ever! I would let you ship one of my children!"Todd
-
★★★★★
"Unit received in great shape. Passed Agilent calibration. Good job!!"Lee
-
★★★★★
"In every aspect these guys are great!"Sarah
Join our Newsletter
Protek
6100 - Protek Digital Multimeters
1.0kV | Vdc High Range
3 3/4 digit, 4,000 count Back lit displayAppropiate input jacks light up when measurement function is selectedCAT II 1000V and CAT III 600V input and...
6300 - Protek Digital Multimeters
1.0kV | Vdc High Range
Five meters in one, Humidity, Luminance, Sound level, Temperature +DMM Buzzer and flashing light warning when leads are connected to wrong input and...
6500 - Protek Digital Multimeters
1.0kV | Vdc High Range
50,000 count and 50 segment bar graph backlit display Basic DC accuracy is ±0.03% RS232 interface with software and cable dBm...
6502 - Protek Analog Oscilloscopes
200MHz | Bandwidth
20MHz Bandwidth Alt-Mag sweep for simultaneous display of main and X5 magnified trace 1mV/Div Vertical sensitivity Alternate trigger for a stable...
6506 - Protek Analog Oscilloscopes
60MHz | Bandwidth
60MHz Bandwidth Alternate trigger for a stable display of unrelated signals Alt-Mag sweep for simultaneous display of the normal and X10 magnified...
6510 - Protek Analog Oscilloscopes
100MHz | Bandwidth
Four traces may be simultaneously displayed in ALT-sweep Five vertical display modes: CH1, CH2, Dual, Add, Subtract Vertical mode triggering for...
667C - Protek Clamp Meters
1.0kA | Max. ACA Range
Measures Volts, Amps, Watts, VA VARs, KWh, Power factor and Frequency in 3-phase 3-wire, 3-phase 4-wire and single-phase circuits Power measurements...
6800 - Protek Digital Multimeters
1.0kV | Vdc High Range
80,000 count Dual Display Basic DC accuracy is 0.05% Pulse output with frequency selection from 0.5Hz to 5KHz with duty cycles from 1% to...
6804 - Protek Digital Oscilloscopes
40.0MHz | Bandwidth
Bandwidth 40 MHz Acquisition rate Real-time 100 MS/s Acquisition rate Equivalent 10 GS/s Input coupling AC,DC,GND Input impedance 1MOhm Max input...
6806 - Protek Digital Oscilloscopes
60.0MHz | Bandwidth
Bandwidth 60 MHz Acquisition rate Real-time 100 MS/s Acquisition rate Equivalent 10 GS/s Input coupling AC,DC,GND Input impedance 1MOhm Max input...
6810 - Protek Digital Oscilloscopes
100.0MHz | Bandwidth
Bandwidth 100 MHz Acquisition rate Real-time 100 MS/s Acquisition rate Equivalent 10 GS/s Input coupling AC,DC,GND Input impedance 1MOhm Max input...
6810CN - Protek Digital Oscilloscopes
100.0MHz | Bandwidth
Previously known as D7510C 4K record length for each channel FFT function and Pass/Fail High resolution 320 x 240 Pixel 256 Color VGA LCD...
6810MN - Protek Digital Oscilloscopes
100.0MHz | Bandwidth
Previously known as D7510M 4K record length for each channel FFT function and Pass/Fail High resolution 320 x 240 Pixel Monochrome LCD...
7700 - Protek Spectrum Analyzers
1.00GHz | High end frequency limit
Wide 10MHz to 1000MHz Frequency range Advanced DSP design converts any oscilloscope into a 1GHz spectrum analyzer. Requires minimum 20MHz Dual Trace...
7800 - Protek Spectrum Analyzers
2.60GHz | High end frequency limit
Wide 10MHz to 1000MHz Frequency range Advanced DSP design converts any oscilloscope into a 1GHz spectrum analyzer. Requires minimum 20MHz Dual Trace...
7802 - Protek Spectrum Analyzers
2.60GHz | High end frequency limit
10MHz to 2.6GHz frequency range Advanced DSP design converts any 20MHz or greater dual trace oscilloscope to a 2.6GHz spectrum analyzer Resolution...
Your IP Address is: 3.145.119.199