BRL TEST INC.

Electronic Test Equipment

Below Budget - On Time - Above Expectations
Search our test equipment


 

World Class Repair Lab

Our 67 ghz enabled lab performs free repair evaluations for your equipment.


 Learn More 

Timely Results

Fastest turn around in the industry.



 Learn More 

Manufacturers

Join our Newsletter

See the Videos

GoLogic-U72-1M - NCI Logic Analyzers


Contact for Quote

  • Model: GoLogic-U72-1M
  • Manufactured by: NCI
  • Max. Channels Number: 72
  • Max. State Speed: 125.0MHz
  • Max. Timing Speed: 500MHz
  • Extra Specifications: PC-based Logic Analyzer
  • Number of channels - 72 or 36 depending on model
  • Memory depth (72 channel models) - 1M version: 1,048,576 samples across all channels. Double-depth option increases the depth to 2,097,152 samples. Transitional timing and state analysis with time stamp halve the memory depth to 524,288 samples. 2M version: 2,097,152 samples across all channels. Double-depth option increases the depth to 4,194,304samples. Transitional timing and state analysis with time stamp halve the memory depth to 1,048,576 samples
  • Memory depth (36 channel models) - 2M version: 2,097,152 samples per channel. Transitional timing and state analysis with time stamp halve the memory depth to 1,048,576 samples. Double-depth option not available. 4M version: 4,194,304 samples per channel. Transitional timing and state analysis with time stamp halve the memory depth to 2,097,152 samples
  • Probe inputs - 240 Kohm input impedance shunted by 10 picofarads. 1 nanosecond maximum skew between channels 2 nanosecond setup time with 0 nanosecond hold time
  • Threshold levels - One independent threshold level per 16 channels. Variable between -4.90 volts and +5.27 volts in about 40 millivolt increments. Voltage swings as low as 600 millivolts are supported
  • Minimum input voltage range - 0.6 volt peak to peak around the threshold voltage. Minimum high level is 0.3 volt above threshold voltage. Minimum low level is 0.3 volt below threshold voltage
  • Clock channels - 4 clock channels are available when using state analysis
  • Minimum sampling rate - 500 Hz timing analysis. No minimum rate for state analysis
  • Maximum sampling rate - 500 MHz timing analysis. 125 MHz with state analysis. Actual maximum state analysis sampling rate is determined by the source clock’s signal quality
  • Trigger patterns - 8 normal trigger patterns plus 2 edge events (timing analysis) or 2 range events (state analysis)
  • Sequence levels - 8 sequence levels. 2 patterns + 2 edge/range per sequence level
  • Sequence counter - One 20-bit counter per sequence level. Minimum counter value is 2 and maximum is 1,046,575
  • Sequence timer - See Global timer limits and Level timer limits appendices for a table of the minimum and maximum timer values for each sampling rate
  • Trigger-out signal - The trigger-out signal uses TTL logic. The connector outputs an active low signal. The signal goes low when the logic analyzer triggers
  • Dimensions - Width: 3.8" (9.5 cm); Length: 6.3" (16 cm); Height: 1.2" (3 cm); Weight: 14 oz. (410 grams)
Your IP Address is: 54.80.93.19