BRL Test, Inc.

Electronic Test Equipment

Below Budget - On Time - Above Expectations
Search our test equipment


World Class Repair Lab

Our 67 ghz enabled lab performs free repair evaluations for your equipment.

 Learn More 

Timely Results

Fastest turn around in the industry.

 Learn More 


Join our Newsletter

See the Videos

PVD-T Series - 12kW Type - Kikusui Power Supplies DC

Get Quote

  • Model: PVD-T Series - 12kW Type
  • Manufactured by: Kikusui
  • Max. Voltage: 600.0V
  • Number of Outputs: Multiple
  • Max. Current: 1.20kA
  • Extra Specifications: Variable-switching Regulated DC Power Supply(CV/CC)

The PVD-T Series power supplies are variable-output switching DC power supplies, with wide-range constant-voltage (CV) and constant-current (CC) outputs that enable the setting of a constant power output.
The PVD-T series power supplies are available in 6 kW/12 kW versions, all of which are 19-inch rack-mountable and approximately 130 mm/260 mm in height. In addition to their excellent space factors, the PVD-T series offerd not only the advantages of a switching system and the output quality of a series regulator, but also implements a large reduction in running costs (power consumption) - traditionally  a problem with large capacity DC power supplies.

PVD-T Series - 12kW Type Lineup:

  • PVD10-1200T 0 to 10V / 0 to 1200A, AC 3 Phase input
  • PVD20-600T 0 to 20V / 0 to 600A, AC 3 Phase input  
  • PVD40-300T 0 to 40V / 0 to 300A, AC 3 Phase input
  • PVD60-200T 0 to 60V / 0 to 200A, AC 3 Phase input
  • PVD80-150T 0 to 80V / 0 to 150A, AC 3 Phase input
  • PVD100-120T 0 to 100V / 0 to 120A, AC 3 Phase input
  • PVD150-80T 0 to 150V / 0 to 80A, AC 3 Phase input
  • PVD300-40T 0 to 300V / 0 to 40A, AC 3 Phase input
  • PVD600-20T 0 to 600V / 0 to 20A, AC 3 Phase input

With its soft switching technology, the PVD-T series provide greater efficiency and a low noise level very close to that of a series regulator.
The PVD-T series also features a power factor of 0.95 (typical) with a power-factor improvement circuit to suppress harmonic currents.
The PVD-T series features analog remote control, circuit protection, an output/status monitor, and a programmable output sequencer. The programmable output sequencer supports the setting and storing of ten programs (maximum number of steps per program: 99) from the operation panel. In addition, up to five units of the same model, provided they have a GPIB or multi-channel interface card installed (one master and four slaves), can be connected with current sharing operation via the built-in control bus.
The PVD-T series power supplies are "next-generation digital power sources," that are ideal for aging, measurement, or providing control to a wide range of electronic devices.

  • Advanced soft-switching technology
  • Noise characteristics very similar to those of a series regulator
  • High voltage (600V), high-current (6kW/600A or 12kW/1200A) output
  • Fast transient response of 3ms (6-kW models only)
  • Large 6-kW capacity in low-profile (approximately 130mm in height) cabinets that can be 19-inch rack-mounted
  • 32-bit full-digital control system
  • Output sequencer supports the storing of ten programs, each of up to 99 steps
  • Efficiency of approximately 90%, which helps reduce power consumption
  • Power-factor improvement circuit produces power factor of 0.95
  • RS-232C interface equipped as standard, with GPIB available as an option
  • Analog remote control and voltage/current monitoring supported
  • Extendable up to 30kW(3000A)/60kW(6000A) with current sharing parallel operation
  • Conforms to UL, CSA, FCC, and CE standards
Your IP Address is: