Com_Power AL-RS101-SET of Loop Antennas: AL-RS101-TX Transmitting and AL-RS101-RX Receiving BRL Test is your Com-Power authorized distributor.
The AL-RS101-TX is a transmitting loop antenna constructed with 20 turns of 12 gauge enamel-insulated copper wire with a mean diameter of 12 cm. The Teflon (PTFE) structure onto which the wire is wound is elongated in order to provide the required 5 cm spacing between the loop coils and the Equipment Under Test
(EUT) when the antenna is placed flush against the EUTsurface as shown to the left. The antenna input terminals are fitted with 4 mm banana jacks.
The AL-RS101-TX also incorporates a mechanism for mounting the ALRS101-RX antenna into the exact required position for calibration of test levels, with the required 5 cm spacing between the loops. The antenna is capable of handling RF currents as high as 15 amperes; corresponding to a maximum magnetic flux density of 1.42x109 pico Tesla or 183.1 dBpT; [9.49x107 pT/ Ampere] at a distance of 5 cm. The AL-RS101-RX is a receiving loop antenna used during RS101 test level calibration to measure the magnetic field intensity generated by the AL-RS101-TX transmit loop. Its construction consists of a 51-turn, electrostatically shielded coil of 7-strand, 41 gauge Litz wire. The antenna output port is fitted with a female BNC connector.
Items can be sold separately call 407-682-4228.