EM Scanner - YIC Technologies

High speed 8GHz Real-time EMC and EMI diagnostic tool on your lab-bench

Authorized Distributor

YIC Technologies Logo
YIC EM Scanner
GW Instek

2024 Spring Sale 10% Off

IN STOCK & READY TO SHIP

Contact us today!

GW Instek

N9020A MXA Signal Analyzer

Accelerate the Development of Wireless Devices with the Speed, Performance & Applications to Adapt to Evolving Test Requirements

Keysight Technologies Logo
N9020A MXA Signal Analyzer

SM200B Spectrum Analyzer

The High Performance SM200B From Signal Hound: High Performance Speed, Accuracy, Security, and Agility Meet Very Low Cost

Signal Hound Logo

Trust Your Equipment to Our World Class Repair Lab

  • Huge Parts Inventory in Stock
  • Free Repair Evaluations
  • Fast Service Turnaround
  • World Class 67GHz Enabled Lab
  • Military PMEL Graduate Staff

Ask Us About Our Repair Warranty!

Manufacturers

Testimonials

  • ★★★★★

    "Fantastic deal. The oscilloscope is in very good condition. Packed for shipment to survive anything"
    Jeff
  • ★★★★★

    "Premium equipment. Excellent communication. Fast. Best value!"
    Avi
  • ★★★★★

    "Practically in new condition"
    Darcy
  • ★★★★★

    "There was a small issue; The people at BRL Test were 100% responsive and issue resolved. Thanks!"
    Mike
  • ★★★★★

    "Best packing ever! I would let you ship one of my children!"
    Todd
  • ★★★★★

    "Unit received in great shape. Passed Agilent calibration. Good job!!"
    Lee
  • ★★★★★

    "In every aspect these guys are great!"
    Sarah

Join our Newsletter

CDN-S9 - Com-Power CDN Coupling Decoupling Networks

$780.00

  • Model: CDN-S9
  • Manufactured by: Com-Power
 
Do you have a CDN-S9 you want to sell?
We buy used equipment!
Learn More

Com-Power CDN-S9 Overview

The signal line Coupling / Decoupling Networks (CDN) are for testing from 150 kHz - 80 MHz according to the EN 61000-4-6 standard for immunity to conducted disturbance induced by radio frequency fields. As the name implies, the CDNs has both coupling and decoupling networks. The coupling network delivers injected RF common mode current disturbance signals through the various signal conductors to the equipment under test (EUT). The decoupling networks are used to insure that the disturbing signals injected on the signal line of the EUT by the coupling networks does not interfere with any the auxiliary equipment (AE) connected to the EUT. Each CDN contains integrated direct capacitive coupling along with a high impedance choke for inductive decoupling. The disturbing signal is injected on signal lines by using a series of coupling networks represented by series C, S, AF and T.
Individual calibration data will be provided with each CDN.
Individual calibration data will be provided with each CDN. However, test level calibration must be performed on site to determine the minimum required test signal needed to achieve the required voltage levels specified by EN 61000-4-6. The appropriate calibration accessories for conducting the level test is available from Com-Power. Application During the test the CDN is connected to the signal cables between the equipment under test (EUT) and auxiliary equipment (AE). The type of cables will determine which CDN to use for the test. The C series CDNs are for injecting disturbing signals onto 50 Ohm (CDN-C50) and 75 Ohm (CDN-C75) coax cables. These CDNs have BNC EUT and AE connections. The S series CDNs are for shielded cables with single or multiple conductors. These CDNs are available for testing 1, 2, 4, 9, 15, 25, 36 and 50 conductor cables. These CDNs have D type or BNC connectors for EUT and AE connections. The AF series CDNs are for unshielded cables with single or multiple conductors carrying low current. Available in 2 conductor (AF2), 4 conductor (AF4) and 8 conductor (AF8). AF series CDNs are supplied with RCA connectors. The T series CDNs are for cables with unshielded balanced conductor pairs typically found in ISDN, DSL and 10/100 baset T data transfer applications. These CDNs can be used at voltages up to 100 VAC and currents up to 2 Amps.
iso9001 Calibration

Calibration & Test Equipment Repair

The BRL Test Lab offers in-house ISO9001:2015 compliant calibration to its end users and industry professionals with precision accuracy, fast turn-around times, and a seamless customer experience.
 Learn More 
Your IP Address is: 54.234.136.147