BRL Test, Inc.

Electronic Test Equipment

Below Budget - On Time - Above Expectations

Manufacturers

Testimonials

  • ★★★★★

    "Fantastic deal. The oscilloscope is in very good condition. Packed for shipment to survive anything"
    Jeff
  • ★★★★★

    "Premium equipment. Excellent communication. Fast. Best value!"
    Avi
  • ★★★★★

    "Practically in new condition"
    Darcy
  • ★★★★★

    "There was a small issue; The people at BRL Test were 100% responsive and issue resolved. Thanks!"
    Mike
  • ★★★★★

    "Best packing ever! I would let you ship one of my children!"
    Todd
  • ★★★★★

    "Unit received in great shape. Passed Agilent calibration. Good job!!"
    Lee
  • ★★★★★

    "In every aspect these guys are great!"
    Sarah

Join our Newsletter

See the Videos

CLCI-400 - Com-Power Current Probes

$7,365.00

  • Model: CLCI-400
  • Shipping Weight: 10lbs
  • Manufactured by: Com-Power
  • Frequency Range: 10 kHz to 400 MHz
  • Standards: ?RTA/DO-160F and Mil-Std-461
 
Com-Power CLCI-400
The CLCI-400 Bulk Current Injection Probe is part of ComPower's extensive line of radio frequency conducted immunity test equipment and calibration accessories; geared specifically to comply with the requirements contained in RTA/DO-160F Mil-Std-461.

The CLCI-400 incorporates split-core ferrites into its rugged circular enclosure and is hinged; thereby allowing the probe to be opened on one side in order to easily place the wire cable(s) or cable bundle(s) to be tested into the probe window making the CLCI-400 much more convenient to use than other non-split core probes

The efficiency of the CLCI-400 probe enables it to achieve test levels up to 10 Vrms across its frequency band with less than 100 watts forward power. The probe can handle up to 100 amps "window current" on its secondary and up to 100 watts RF input power to its primary. An RF Current probe is typically used in conjunction with spectrum analyzer or EMI receiver which measure magnitude quantities in terms of true rms voltage. The Transfer Impedance conversion factor which is expressed in terms of dB over 1? converts the voltage quantity into a current quantity expressed in terms of dB over 1 uA.

Frequency Range: 10 kHz to 400 MHz

Window Diameter: 1.575 inches (40 mm)

Outside Diameter: 5.75 inches (146 mm)

Width: 2.75 inches (70 mm)

Weight: 4.5 lbs. (2.04 kg)

Input Connector: Type-N (female)

Max. Input Power: 100 Watts (continuous)

Turns Ratio: 1:1

Max. Core Temperature: 110° C - 230° F

Accessories Available from Com-Power for setting test levels and running the test:

FCLC-400 Calibration Fixture

Term-50-100W Power Terminator ASC series Power Amplifiers
Your IP Address is: 54.167.47.248