CLCE-400 - Com-Power Current Probes

Com-Power CLCE-400 Overview

Com-Power CLCE-400

The CLCE-400 RF Current Probe is part of Com-Power's extensive line of radio frequency conducted emission/ immunity test equipment and calibration accessories. The CLCE-400 is suitable for complaince measurements required by CISPR 22 CISPR 32 DO-160 Mil Std 461 etc as well as for applied current monitoring during conducted immunity tests.

It's design incorporates a split-core ferrite in a rugged circular hinged enclosure; thereby allowing the probe to be opened on one side in order to easily place the wire cable(s) or cable bundle(s) to be tested into the probe window making the CLCE-400 much more convenient to use than other non-split core probes. The CLCE-400 is designed to be used in conjunction with a spectrum analyzer or EMI receiver or any 50 Ohm impedance measurement equipment which measure magnitude quantities in terms of true rms voltage.

Frequency Range: 10 kHz to 400 MHz

Suitable for CISPR Mil-Std 461 & DO-160

Individual calibration

Three-year warranty

Frequency Range: 10 kHz to 400 MHz

Window (Aperture) Diameter: 1.25 inches (32 mm)

Outside Diameter: 2.83 inches (72 mm)

Height: 0.76 inches (19.3 mm)

Weight: 0.275 lbs. (0.125 kg)

Connector: Type-N (Female)

Transfer impedance (ZtΩ): 7Ω*

Transfer impedance (dBΩ): -21 to 17 dBΩ (typical)*

Max Primary Current (DC-400 Hz): 100 Amps

Max Primary Current (RF): 4 Amps

Max. Core Temperature: 248℃F (120?C)

Related Accessories Available from Com-Power:

• FCLCE-1000 Calibration Fixture
• TEP-050 50Ω Terminator
• SPA-815TGE Spectrum Analyzer