BRL Test, Inc.

Electronic Test Equipment

Below Budget - On Time - Above Expectations

Manufacturers

Testimonials

  • ★★★★★

    "Fantastic deal. The oscilloscope is in very good condition. Packed for shipment to survive anything"
    Jeff
  • ★★★★★

    "Premium equipment. Excellent communication. Fast. Best value!"
    Avi
  • ★★★★★

    "Practically in new condition"
    Darcy
  • ★★★★★

    "There was a small issue; The people at BRL Test were 100% responsive and issue resolved. Thanks!"
    Mike
  • ★★★★★

    "Best packing ever! I would let you ship one of my children!"
    Todd
  • ★★★★★

    "Unit received in great shape. Passed Agilent calibration. Good job!!"
    Lee
  • ★★★★★

    "In every aspect these guys are great!"
    Sarah

Join our Newsletter

See the Videos

200 - AP Instruments Network Analyzers


Get Quote

  • Model: 200
  • Manufactured by: AP Instruments
  • High end freq limit: 15.00GHz
  • Instrument Type: Vector
  • Extra Specifications: Analog Network Analyzer
The 200 Network Analyzer system is composed of an analog source/receiver unit, a USB port adapter, probes, interface cables, software and calibration certificate. The host PC requires Windows® 98 or later and a standard USB port. The 200 Network Analyzer offers the following high performance features: 11.6 millihertz to 15 Megahertz coverage 110 dB'''''s of dynamic range with 0.025 dB mag. and 0.2 degree phase accuracy Up to 10,001 measurement points with linear or logarithmic frequency sweeps Automatic magnitude and phase correction compensates for test leads or fixtures Source features Direct digital synthesis for fast sweeps 11.6 millihertz to 15 MHz range,11.6 millihertz resolution Output level adjustable in 1 dB steps from 1.25 millivolts to 1.77 volts rms 50 ohm output with current limiting Output can be DC offset up to +/- 10 V eliminating large coupling capacitors at low measurement frequencies Two channels for B/A ratioed, transfer function measurements High selectivity two stage receiver architecture for high noise immunity Digital signal processing provides a user selectable IF bandwidth, optimizing noise immunity and measurement speed Selectable AC (>=10 Hz) or DC coupling with one megohm input impedance Inputs can be DC offset up to +/- 10 V facilitating DC coupled measurements.
Your IP Address is: 18.205.176.100