BRL Test, Inc.

Electronic Test Equipment

Below Budget - On Time - Above Expectations

PS310 - Stanford Research Systems Power Supplies DC


Get Quote

  • Model: PS310
  • Manufactured by: Stanford Research Systems
  • Max. Voltage: 1.3kV
  • Number of Outputs: Single
  • Max. Current: 20.00mA
  • Extra Specifications: High Voltage Power Supply 12 VDC to 1.25 kV

The PS300 High Voltage Power Supply series consists of three efficient, microprocessor-controlled, switching DC power supplies capable of delivering 25 W of output power at voltages up to 5 kV. All models have 0.001 % regulation and 0.05 % accuracy, and the output voltage can be adjusted with 1 V resolution over the entire operating range.

All PS300 series supplies have rear-panel SHV connectors. Optional cables allow connection with standard high-voltage connectors (SHV or MHV). A three-position, high-voltage enable switch on the front panel prevents the high voltage from being turned on under computer control unless the switch has been manually armed. A highly visible red LED always indicates when the high voltage is on. Convenient front-panel LED displays indicate both the voltage and current delivered to the load at all times.

  • 5 kV, 2.5 kV, 1.25 kV supplies
  • 25 W output power
  • 1 volt resolution
  • 0.001 % regulation, 0.05 % accuracy
  • Dual polarity
  • Programmable limits and trips
  • 0.0015 % ripple
  • Voltage and current monitors
  • Stored settings
  • GPIB interface (opt.)
Your IP Address is: 52.91.176.251