The TS1410 DC power supply has been designed for applications requiring a professional quality high current bench power source for equipment that is normally operated from twelve volt batteries.
The output voltage has been made adjustable (via a calibrated knob) between 12V and 14V. This covers most “twelve volt” sources such as six lead-acid cells (13.8V) or ten nickel-cadmium cells (12.6V).
The output is current limited at just over 10A and this current can be supplied continuously. This is an important advantage over many low cost PSUs where the rated current can only be supplied briefly. A built-in analogue meter provides an indication of output current.
The TS1410 provides a very high performance including excellent line and load regulation and a ripple and noise figure typically below 1mV. To remove voltage drops in the connecting leads and to ensure near perfect regulation at the load, remote sense terminals are incorporated.
An over-voltage crowbar system provides very high protection against power supply failure or the application of external voltages. The output is fully protected against short circuits. Reverse voltage protection is also incorporated.
- 12-14V/10A PowerPack PSU
- Simulates all 12V battery types
- Built-in analog current meter
- 12 to 14 Volts range, 10 Amps maximum
- Excellent regulation, low ripple and noise
- Short-circuit protection, over-voltage crowbar
- Remote sense terminals