BRL Test, Inc.

Electronic Test Equipment

Below Budget - On Time - Above Expectations

Manufacturers

Testimonials

  • ★★★★★

    "Fantastic deal. The oscilloscope is in very good condition. Packed for shipment to survive anything"
    Jeff
  • ★★★★★

    "Premium equipment. Excellent communication. Fast. Best value!"
    Avi
  • ★★★★★

    "Practically in new condition"
    Darcy
  • ★★★★★

    "There was a small issue; The people at BRL Test were 100% responsive and issue resolved. Thanks!"
    Mike
  • ★★★★★

    "Best packing ever! I would let you ship one of my children!"
    Todd
  • ★★★★★

    "Unit received in great shape. Passed Agilent calibration. Good job!!"
    Lee
  • ★★★★★

    "In every aspect these guys are great!"
    Sarah

Join our Newsletter

See the Videos

AVL-5-B - Avtech Electrosystems Ltd. Pulse Generators


Get Quote

  • Model: AVL-5-B
  • Manufactured by: Avtech Electrosystems Ltd.
  • Max. V(out): 500.0V
  • Channels: 1
  • Max. Pulse Rep. Freq.: 2.00kHz
  • Extra Specifications: High Voltage Pulser

The AVL series provides high amplitude (to ±500V) pulse outputs with rise times as low as 1 ns and fall times of 2 ns, pulse repetition frequencies to 5 kHz and maximum pulse widths variable from 3 to 400 ns.
The AVL-5 family provides output amplitudes variable from 0 to 500 Volts, with pulse widths variable from 8 to 100 ns, with 4 ns rise time and 5 ns fall times, and repetition rates to 2 kHz.
For all models, either output polarity or an optional dual output polarity can be provided. The output polarity of dual-polarity units can be switched from the front panel or by computer command.
All instruments with the -B suffix include a complete computer control interface. This provides GPIB and RS-232 computer-control, as well as front panel keypad and adjust knob control of the output pulse parameters. A large backlit LCD displays the output amplitude, polarity, frequency, pulse width, and delay. An Ethernet port for Telnet or Web-based control is optional.
All models may be triggered externally using a TTL-level pulse. All models include a delay control and sync output for sampling oscilloscope triggering purposes.
A DC offset or bias insertion option is available.

Your IP Address is: 18.234.111.56