BRL Test, Inc.

Electronic Test Equipment

Below Budget - On Time - Above Expectations
Search our test equipment


World Class Repair Lab

Our 67 ghz enabled lab performs free repair evaluations for your equipment.

 Learn More 

Timely Results

Fastest turn around in the industry.

 Learn More 


Join our Newsletter

See the Videos

AVR-8A-B - Avtech Electrosystems Ltd. Pulse Generators

Get Quote

  • Model: AVR-8A-B
  • Manufactured by: Avtech Electrosystems Ltd.
  • Max. V(out): 1.0kV
  • Channels: 1
  • Max. Pulse Rep. Freq.: 1.00kHz
  • Extra Specifications: High Voltage Pulser

The AVR-5B, AVR-7B, and AVR-8A series of pulse generators are fast, high-voltage pulse generators capable of driving load impedances of 50Ω and higher.
The extra-high-voltage model AVR-8A-B provides up to 1000V out (to 50Ω) with rise times of 100 ns and pulse widths variable from 200 ns to 200 us. PRF is variable from 1 Hz to 1 kHz. This model will provide peak output power of 20000 Watts and average outputs of 40 Watts (i.e. 0.2% maximum duty cycle).
The output stages in all models will safely withstand any combination of front panel control settings, output open or short circuits, and high-duty cycles. An internal power supply monitor removes the power to the output stage for five seconds if an average power overload exists.
Aside from the internal clock, all models can also be triggered by a single-pulse pushbutton or an external TTL-level trigger input. When triggered externally, the output pulse width can be set to track the input trigger pulse width (PWOUT = PWIN). A delay control and a sync output are provided for oscilloscope triggering. A gate input is also provided. A burst mode option is also available. Either output polarity can be provided, as well as a dual output polarity option.
All models include a computer control interface. This provides GPIB and RS-232 computer-control, as well as front panel keypad and adjust knob control of the output pulse parameters. A large back-lit LCD displays the output amplitude, polarity, frequency, pulse width, and delay.
All models are available with optional electronic analog control of the amplitude.
The standard output connectors may optionally be changed from N (on the AVR-5 and AVR-7 series) or SHV (AVR-8) to SHV, MHV or HN by adding “-SHV”, “-MHV”, or “-HN” to the model number. All models require 100 - 240 V, 50 - 60 Hz, and are mounted in a rugged all-metal 3.9” x 17” x 14.8” chassis.

Your IP Address is: