BRL Test, Inc.

Electronic Test Equipment

Below Budget - On Time - Above Expectations

Manufacturers

Testimonials

  • ★★★★★

    "Fantastic deal. The oscilloscope is in very good condition. Packed for shipment to survive anything"
    Jeff
  • ★★★★★

    "Premium equipment. Excellent communication. Fast. Best value!"
    Avi
  • ★★★★★

    "Practically in new condition"
    Darcy
  • ★★★★★

    "There was a small issue; The people at BRL Test were 100% responsive and issue resolved. Thanks!"
    Mike
  • ★★★★★

    "Best packing ever! I would let you ship one of my children!"
    Todd
  • ★★★★★

    "Unit received in great shape. Passed Agilent calibration. Good job!!"
    Lee
  • ★★★★★

    "In every aspect these guys are great!"
    Sarah

Join our Newsletter

See the Videos

AVR-9D-B - Avtech Electrosystems Ltd. Pulse Generators


Get Quote

  • Model: AVR-9D-B
  • Manufactured by: Avtech Electrosystems Ltd.
  • Max. V(out): 20.0V
  • Channels: 1
  • Max. Pulse Rep. Freq.: 5.00kHz
  • Extra Specifications: Medium Voltage High Speed Pulser

The AVR-9 series of pulse generators offer fast medium voltage pulsing with high current capability. These models are ideal for driving solenoids, pulse testing of MOSFETs, and other applications.
Model AVR-9A-B provides up to 12 Volts into load impedances of 10 Ω or greater, with rise times of 10 ns and pulse widths from 200 ns to 2 ms. The pulse repetition frequency (PRF) is variable from 0 to 50 kHz, and the maximum output duty cycle is 50%.
Model AVR-9B-B is similar, but provide higher amplitudes of up to 20V into 10 Ω. The rise and fall times are 15 ns.
Model AVR-9C-B can drive even lower load impedances, providing up to 12 Volts into a load of 1Ω or higher (i.e., up to 12 Amps of current). The rise and falls times are 50 ns, and the pulse width is variable from 200 ns to 200 us. The PRF is variable from 0 to 5 kHz, and the maximum output duty cycle is 10%.
Model AVR-9D-B has the highest current rating, providing amplitudes of up to 20V into 1Ω (i.e., up to 20 Amps of current). The rise and falls times are 80 ns, and the pulse width is variable from 200 ns to 200 us. The PRF is variable from 0 to 5 kHz, and the maximum output duty cycle is 10%.
All models include a complete computer control interface. This provides GPIB and RS-232 computercontrol, as well as front panel keypad and adjust knob control of the output pulse parameters. A large back-lit LCD displays the output amplitude, polarity, frequency, pulse width, and delay.

Your IP Address is: 18.207.137.4