BRL Test, Inc.

Electronic Test Equipment

Below Budget - On Time - Above Expectations
Search our test equipment


 

World Class Repair Lab

Our 67 ghz enabled lab performs free repair evaluations for your equipment.


 Learn More 

Timely Results

Fastest turn around in the industry.



 Learn More 

MI.4031 - Spectrum Transient Recorders Digitizers


Get Quote

  • Model: MI.4031
  • Manufactured by: Spectrum
  • Max Sample Rate: 50MSa/sec
  • Channels: 2
  • Resolution: 14 bits
  • Extra Specifications: Transient Recorder

The MI.40xx (incl. MI4031 - Transient Recorder ) is best suitable for applications that need high sampling rates as well as a maximum signal dynamic. These boards offer a resolution 4 times higher than 12 bit boards. On the MI.40xx every channel has its own amplifier and A/D converter.

Each input channel could be adapted to a wide variety of signal sources. This is done by software selecting a matching input range, an input impedance and an individual input offset. The user will easily find a matching solution from the six offered models. These versions are working with sampling rates of 20 MS/s or 50 MS/s and have one, two or four channels and could also be updated to a multi-channel system using the internal synchronization bus.

Data is written in the internal 8 MSamples up to 256 MSample large memory. This memory could also be used as a FIFO buffer. In FIFO mode data could be transferred on-line directly into the PC RAM or to hard disk.

  • 14 bit transient recorder
  • 2 synchronous channels with separate A/D 
  • Maximum sampling rate 50 MS/s on 2 channels
  • High dynamic range
  • Up to 256 MSample memory
  • 6 input ranges between ±200 mV and ±10 V
  • FIFO mode up to 50 MS/s sum samplerate
  • Input offset up to ±200%
  • Automatic offset calibration
  • Synchronisation to multi-board system possible
  • 32 Bit PCI interface
  • Compatible with 3,3V and 5V PCI I/O-Voltage
Your IP Address is: 54.163.20.57