BRL Test, Inc.

Electronic Test Equipment

Below Budget - On Time - Above Expectations

MI.4032 - Spectrum Transient Recorders Digitizers


Get Quote

  • Model: MI.4032
  • Manufactured by: Spectrum
  • Max Sample Rate: 50MSa/sec
  • Channels: 4
  • Resolution: 14 bits
  • Extra Specifications: Transient Recorder

The MI.40xx (incl. MI4032 - Transient Recorder ) is best suitable for applications that need high sampling rates as well as a maximum signal dynamic. These boards offer a resolution 4 times higher than 12 bit boards. On the MI.40xx every channel has its own amplifier and A/D converter.

Each input channel could be adapted to a wide variety of signal sources. This is done by software selecting a matching input range, an input impedance and an individual input offset. The user will easily find a matching solution from the six offered models. These versions are working with sampling rates of 20 MS/s or 50 MS/s and have one, two or four channels and could also be updated to a multi-channel system using the internal synchronization bus.

Data is written in the internal 8 MSamples up to 256 MSample large memory. This memory could also be used as a FIFO buffer. In FIFO mode data could be transferred on-line directly into the PC RAM or to hard disk.

  • 14 bit transient recorder
  • 4 synchronous channels with separate A/D 
  • Maximum sampling rate 50 MS/s on 4 channels
  • High dynamic range
  • Up to 256 MSample memory
  • 6 input ranges between ±200 mV and ±10 V
  • FIFO mode up to 50 MS/s sum samplerate
  • Input offset up to ±200%
  • Automatic offset calibration
  • Synchronisation to multi-board system possible
  • 32 Bit PCI interface
  • Compatible with 3,3V and 5V PCI I/O-Voltage
Your IP Address is: 54.166.133.84