GW Instek

Authorized Distributor

Contact us today!

GW Instek

N9020A MXA Signal Analyzer

Accelerate the Development of Wireless Devices with the Speed, Performance & Applications to Adapt to Evolving Test Requirements

Keysight Technologies Logo
N9020A MXA Signal Analyzer

EM Scanner - YIC Technologies

High speed 8GHz Real-time EMC and EMI diagnostic tool on your lab-bench

Authorized Distributor

YIC Technologies Logo
YIC EM Scanner

SM200B Spectrum Analyzer

The High Performance SM200B From Signal Hound: High Performance Speed, Accuracy, Security, and Agility Meet Very Low Cost

Signal Hound Logo

Trust Your Equipment to Our World Class Repair Lab

  • Huge Parts Inventory in Stock
  • Free Repair Evaluations
  • Fast Service Turnaround
  • World Class 67GHz Enabled Lab
  • Military PMEL Graduate Staff

Ask Us About Our Repair Warranty!

Manufacturers

Testimonials

  • ★★★★★

    "Fantastic deal. The oscilloscope is in very good condition. Packed for shipment to survive anything"
    Jeff
  • ★★★★★

    "Premium equipment. Excellent communication. Fast. Best value!"
    Avi
  • ★★★★★

    "Practically in new condition"
    Darcy
  • ★★★★★

    "There was a small issue; The people at BRL Test were 100% responsive and issue resolved. Thanks!"
    Mike
  • ★★★★★

    "Best packing ever! I would let you ship one of my children!"
    Todd
  • ★★★★★

    "Unit received in great shape. Passed Agilent calibration. Good job!!"
    Lee
  • ★★★★★

    "In every aspect these guys are great!"
    Sarah

Join our Newsletter

P9611A - Picotest Power Supplies DC


Get Quote

  • Model: P9611A
  • Manufactured by: Picotest
  • Max. Voltage: 60
  • Number of Outputs: 1
  • Max. Current: 150W
  • Extra Specifications: New in box. 3 Year Warranty.
Do you have a P9611A you want to sell?
We buy used equipment!
Learn More

Picotest P9611A Overview

KEY FEATURES:
  • Highest Quality Yet Competitively Priced
  • Continuous Autoranging
  • Better Transient Response
  • Low noise - 35% less than competitors
  • Optical controls - Don?t get dirty or wear out
  • Programmed Power Sequencing Capability
  • Lightweight < 2.5kgs (5.5 lbs) and Stackable

The P961xA Series of programmable DC power supplies gives you the performance of the top-of-the-line power supplies at an outstanding price. All models provide clean power, excellent regulation and a fast transient response. The P961xA Series is designed to meet the requirements of the most demanding applications in circuit design and verification, production testing, and quality assurance with the superior quality and reliability that you have come to expect from Picotest.

Single-Output Autoranging Power Supplies
These single output power supplies offer continuous autoranging, eliminating the need to manually select the optimum range. All of the power supplies power is available to you across the voltage and current ranges giving you the ultimate in flexibility. Output load is protected against overvoltage and overcurrent, which are easily monitored and adjusted from the front panel and remote interface. Remote sense is available to eliminate the errors due to voltage drops on the load leads.

Low Noise and Excellent Regulation
LESS than 0.01% load and line regulation keep the outputs steady and stable. Low noise assures clean power for precision circuitry while the low common mode current (< 1.5uArms) provides isolation from power line current injection.

Front Panel Operation
The intuitive interface allows you to monitor both voltage and current simultaneously for any one output from the front panel on an easy to read display. A optical knob doesn?t get dirty and allows you to quickly adjust the output at the resolution you need for precise and reliable results. You can program voltage or current sequences.

Remote Interface
All models come standard with USB and GPIB interfaces. You can program both voltage and current. In addition, you can monitor the output terminals for voltage and current, while a query command lets you read the programmed voltage and current. And programming is done in easy to use SCPI.

More Features:

  • Single output - Two Models
  • P9610A 108W (36V/7A), P9611A 150W (60V/6A)
  • Excellent Load and Line Regulation
    • < 0.01% + 2mV Voltage change for any load change
    • < 0.01% + 250uA Current change load for any load change
  • Very fast transient response times (<30us - P9610A/<50ms P9611A)
  • Very fast settling times (<40ms - P9610A/<50ms P9611A)
  • Constant voltage, constant current, programmed sequencing
  • High accuracy and resolution
    • Voltage 0.05% + 10mV (Output + offset)
    • Current 0.2% + 10mA (Output + offset)
  • Low ripple & noise
  • GPIB and USB Connections optional
  • Programming Compatible with the Keysight E3632A
  • No Shorting Bar Necessary
  • Remote sense, Master -Slave Operation (P9610A only)
  • Three-year warranty
Specifications
Output Ratings (@ 0°C ~ 40°C) (P9610A/P9611A)
Voltage:0 to 36 V / 0 to 60 V³ (P9611A)
Current:0 to 7 A / 0 to 6 A (P9611A)
Programming Accuracy¹ 1 Year (@ 25°C ±5°C), (% of Output + Offset)
Voltage:0.05% + 10 mV
Current:0.2% + 10 mA
Read-Back Accuracy¹ 1 Year (over USB or front panel with respect to actual output (@ 25°C ±5°C),
(% of Output + Offset)
Voltage:0.05% + 5 mV
Current:0.15% + 5 mA
Ripple and Noise (with outputs ungrounded, or either output terminal grounded, 20 Hz to 20 MHz
Voltage:< 0.35 mVrms / < 0.5 mVrms (P9611A)
< 2 mV p-p / < 3 mV p-p (P9611A)
Current:< 2 mArms
Common Mode Current:< 1.5 μArms
Load Regulation ±(% of Output + Offset)
Change in output voltage or current for any load change within ratings.
Voltage:< 0.01 % + 2 mV
Current:< 0.01 % + 250 μA
Line Regulation ±(% of Output + Offset)
Change in output voltage or current for any load change within ratings.
Voltage:0.01 % + 2 mV
Current:0.01% + 250μA
Programming Resolution
Voltage:1 mV
Current:0.21 mA / 1 mA (P9611A)
Read-Back Resolution
Voltage:1 mV
Current:0.1 mA / 0.21 mA (P9611A)
Meter Resolution
Voltage:1 mV / 10 mV (P9611A)
Current:0.1 mA / 1 mA (P9611A)
Transient Response Time
Less than 30/50 usec for output recover to within 15 mV following a change in output current from full load to half load or vice versa.
Command Processing Time via GPIB
Read-Back Commands: Maximum time to read-back output by MEASure? commands< 20 ms
Output Programming Range (maximum programmable values)
Voltage:0 to 37.8 V / 0 to 60 V (P9611A)
Current:0 to 7.35 A / 0 to 6 A (P9611A)
Temperature Coeffiecient ±(% of Output + Offset)
Maximum change in output / read-back per °C after a 30-minute warm-up.
Voltage:0.01 % + 3 mV / 0.01 % + 10 mV (P9611A)
Current:0.02 % + 3 mA
Stability (% of Output + Offset)
Maximum change in output / read-back per °C after a 30-minute warm-up.
Voltage:0.02 % + 1 mV / 0.05 % + 10 mV (P9611A)
Current:0.1 % + 1 mA / 0.15 % + 2 mA (P9611A)
Voltage Programming Speed
Maximum time required for output voltage to settle within 1 % of its total excursion (for resistive load). Excludes command processing time.
Full Load Up (0V ~ 36V):< 40 ms / (0V~60V): < 100 ms (P9611A)
Full Load Down (36V ~ 0V):< 40 ms / (60V~0V): < 50 ms (P9611A)
No Load Up (0V ~ 36V):< 20 ms / (0V~60V): < 35 ms (P9611A)
No Load Down (36V ~ 0V):< 400 ms / (60V~0V): < 500 ms (P9611A)


General Specifications²
ItemLimitation & Description
Power Supply:100V ~ 120V (115V Range)
220V ~ 240V (230V Range)
Power Line (Hz):47Hz ~ 63Hz
Interfaces:USB & GPIB
Power Consumption:400VA Maximum
Size & Weight for Rack (WxHxD):214.6 x 88.6 x 280 mm, < 2500 g (5.5 Lbs)

1. The accuracy specifications are gained under 1-hour warm-up condition and the calibration at 25°C.
2. For more information, please check the user's manual.
3. The red supplements are the P9611A's specifications. If there is no red, the specs. are the same as the P9610A's.

The specifications are subject to change without notice due to design improvements.

Question: Why buy a refurbished E3632A when you can get a new superior yet compatible P9610/P9611A at a lower price with a 3 year warranty?

PICOTEST POWER SUPPLY COMPARISON SHEET
FunctionModel P9610AModel P9611AModel E3632A
VA Power108W150W120W
Linear/Switch/MixedMixedMixedLinear
Single OutputYesYesYes
AutorangingYesYesNo, two ranges
Output
Voltage & Current
0 to 36 V
0 to 7 A
0 to 60 V
0 to 6 A
0 to 15V/7A
0 to 30V/4A
Transient Response< 30 μs< 50 μs< 50 μs
Ripple & Noise Voltage
(20Hz to 20MHz)
< 0.35 mVrms
< 2 mVp-p
< 0.50 mVrms
< 3 mVp-p
< 0.35 mVrms
< 2 mVp-p
Ripple & Noise Current &
Common Mode Current
< 2 mArms
< 1.5 uArms
< 2 mArms
< 1.5 uArms
< 2 mArms
< 1.5 uArms
Master-Slave ControlYesNoNo
Remote SensingYesNoYes
Programming Accuracy
Voltage & Current
0.05% + 10 mV
0.2% + 10 mA
0.05% + 10 mV
0.2% + 10 mA
0.05% + 10 mV
0.2% + 10 mA
Read-Back Accuracy
Voltage & Current
0.05% + 5 mV
0.15% + 5 mA
0.05% + 5 mV
0.15% + 5 mA
0.05% + 5 mV
0.15% + 5 mA
Programming Resolution
Voltage & Current
1 mV
0.21 mA
1 mV
1 mA
1 mV
0.5 mA
Read-Back Resolution
Voltage & Current
1 mV
0.1 mA
1 mV
0.21 mA
0.5 mV
0.1 mA
Meter Resolution
Voltage & Current
1 mV
0.1 mA
10 mV
1 mA
1 mV
1 mA
Output Programming
Range (Voltage & Current)
0 to 37.8 V
0 to 7.35 A
0 to 60 V
0 to 6 A
0 to 15.45V/7.21A
0 to 30.9V/4.12A
Stability
(Voltage & Current)
0.02 % + 1 mV
0.1 % + 1mA
0.05 % + 10 mV
0.15 % + 2 mA
0.02 % + 1 mV
0.1 % + 1mA
Short-Withstood CircuitYesYesFair, weaken power
Sequencing ModeYesYesNo
OVP/OCP/OTPYesYesNo OTP
Optical KnobYesYesNo
No Shorting BarYesYesNo
Front & Rear BumperYesOptional ($15)Yes
USB or USB/GPIB InterfacesOptional ($25/$95)Optional ($25/$95)Yes
Size & Weight21.5*8.9*28 cm, < 2.5 Kgs21.5*8.9*28 cm, < 2.5 Kgs21.3*13.3*34.8cm, 9.5 Kgs
Voltage Programming Speed
Full Load Up(0V~36V)(0V~60V)(0V~30V)
< 40 ms< 100 ms50 ms
Full Load Down(36V~0V)(60V~0V)(30V~0V)
< 40 ms< 50 ms45 ms
No Load Up(0V~36V)(0V~60V)(0V~30V)
< 20 ms< 35 ms20 ms
No Load Down(36V~0V)(60V~0V)(30V~0V)
< 400 ms< 500 ms400 ms
iso9001 Calibration

Calibration & Test Equipment Repair

The BRL Test Lab offers in-house ISO9001:2015 compliant calibration to its end users and industry professionals with precision accuracy, fast turn-around times, and a seamless customer experience.
 Learn More 
Your IP Address is: 18.97.14.81