BRL Test, Inc.

Electronic Test Equipment

Below Budget - On Time - Above Expectations
Search our test equipment


World Class Repair Lab

Our 67 ghz enabled lab performs free repair evaluations for your equipment.

 Learn More 

Timely Results

Fastest turn around in the industry.

 Learn More 


Join our Newsletter

See the Videos

3148B - ETS-Lindgren Antennas

Get Quote

  • Model: 3148B
  • Manufactured by: ETS-Lindgren
  • Extra Specifications: New, 2 Year Warranty,High Gain, Meets CISPR Cross Polarization Requirements, Low VSWR, Powder Coat Finish, Individually Calibrated, Flexible Mounting

ETS-Lindgren 3148B

The Model 3148B Log Periodic Dipole Array Antenna is specifically designed for making CISPR 16-1 measurements which require a 20 dB difference in the cross polarization rejection. This is achieved using an engineering design and manufacturing process that offsets all of the elements in a precision pattern. The excellent cross-polarization property ensures minimum measurement uncertainty for radiated emissions and normalized site attenuation measurement.

The precision construction of the assembly of the boom and elements result in excellent VSWR and optimal phase relationship.

The Model 3148B antenna features relatively constant linear gain (measures in far field without any sudden ?dips? or ?bumps?).

A Type N connector is provided.

Frequency Range

The frequency range of the Model 3148B is 200 MHz to 2 GHz. This makes the Model 3148B ideal for CISPR 16 testing and other standards based on it, such as CISPR 25.

High Gain

The Model 3148B?s design provides a balance between the shortest antenna and the highest possible gain, with a 5 dB average gain over its frequency.


The choice of spacing between booms and the changing element diameter provide excellent impedance of the antenna. This results in a in low VSWR.

Individually Calibrated

The Model 3148B is individually calibrated at 1 m per SAE ARP 958 and 3 m and 10 m per ANSI C63.5. This antenna also comes with a signed Certificate of Calibration Conformance.

Flexible Mounting System

The Model 3148D antenna includes both an EMCO classic mount and a rear "stinger" mount.

Standard Configuration

  • Individually Calibrated at 1 m per SAE ARP 958 Actual antenna factors and a signed Certificate of Calibration Conformance provided.
  • Antenna


  • Custom cases are available on request.
  • Support Rod Antenna mount with insert drilled to accept ETS-Lindgren or other tripod with standard 1/4 in x 20 threads.
  • ETS-Lindgren Tripod. Several nonmetallic, non-reflective tripods for use at EMC test sites.

Electrical Specifications

Frequency Minimum200 MHz 
Frequency Maximum2 GHz 
ConnectorsType N (f) 
Impedance (Nominal)50 Ω 
Maximum Continuous Power1 kW 
Pattern Typedirectional 
Peak Power1.3 kW 

Physical Specifications

Depth86.7 cm   (34.13 inches) 
Height11.6 cm   (4.57 inches) 
Length73.7 cm   (29.02 inches) 
Weight2 kg   ( 4.41 lb ) 
Width85.6 cm   (33.70 inches) 


Expanded Uncertainty Values for Antenna Factors: ANSI C63.5 10M1-2 GHz+/- 1.0 dB 
200-1000 MHz +- 0.8 dB 
Expanded Uncertainty Values for Antenna Factors: ANSI C63.5 3M1-2 GHz+/- 1.0 dB 
200-1000 MHz +- 0.9 dB 
Expanded Uncertainty Values for Antenna Factors: SAE, ARP 958 1M1-2 GHz+- 1.4 dB 
200-1000 MHz +- 0.6 dB 

Your IP Address is: