BRL Test is your authorized Com-Power distributer.
The Com-Power CDN-M350E is part of a series of Coupling/Decoupling Networks designed specifically for testing product for conducted immunity per IEC 61000-4-6.
The CDN-M350E series is for used for testing products with three wire power supply lines (L +N + PE). It can handle up to 50 A (AC) or 35 A DC power source. It has 5.2 mm shrouded banana socket for both EUT and AE power connection.
The RF disturbance signal is injected using a BNCconnector which can handle up to 40 V of input. The bottom surface of the CDN is not painted, so that it be properly grounded during the test.
All Com-Power CDNs can be purchased seperately or part of the CIS series conducted immunity test system. The test system includes the ACS series power amplifier and accessories required to conduct the immunity testing.
All Com-Power CDNs are individually calibrated.The Com-Power CDN-M350E fully complies with the requirement contained in the IEC 61000-4-6 and CISPR 16-1-2.
Product Name: Coupling Decoupling Network (CDN)Compliant Test Standards: IEC / EN 61000-4-6, CISPR 16-1-2Application: Three conductor power cableFrequency Range: 150 kHz to 230 MHzI/O rating for EUT/AE Ports: 250 VAC, 350 VDCMax Input Voltage: 40 V (Max)Application: Three wire power cablesCurrent Rating: 50 Amps AC / 35 Amps DCRF Input Connector: 50 Ω BNC (Female)I/O Connection: 5.2 mm banana sockets with shrouded sheathCommon Mode Impedance150 kHz - 24 MHz: 150Ω ± 20Ω24 MHz - 80 MHz: 150Ω + 60Ω / ? -45Ω80 MHz - 230 MHz: 150Ω + 60Ω / ? -60ΩVoltage Division Factor: 9.5 dB +4.5 / -0.5Dimensions: 7 x 7 x 16 ¾ inches or 17.7 x 17.7 x 42.5 cmWeight: 7.5 lbs. or 3.4 kgAccessories Available from BRL Test for setting test levels and running the test:
- ADA-M350E shorting adapters
- ADA-515-2 150 Ω to 50 Ω adapters
- TEP-050 50 Ω Terminator
- 1, 3, 6, 10, 20, 30 dB Power Attenuators
- DCU-1000-100W Directional Coupler
- ASC series Power Amplifiers