Certified Premium Used at BRL Test.
The Anritsu MS2723C 13 GHz Spectrum Master High Performance Handheld Spectrum Analyzer features over 30 analyzers in one to meet virtually every measurement need. It is used for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, regulatory compliance, or Wi-Fi and wireless network measurements. Measure: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Masks. Interference Analyzer: Spectrogram, Signal Strength, RSSI, Mapping. Frequency Coverage: 9 kHz to 13 GHz. Dynamic Range: > 104 dB in 1 Hz RBW. DANL: ?160 dBm in 1 Hz RBW @ 1 GHz preamp On. Phase Noise: ?100 dBc/Hz @ 10 kHz offset at 1 GHz. Frequency Accuracy: ± 25 ppb with GPS On. 1 Hz to 10 MHz Resolution Bandwidth (RBW). Traces: Normal, Max Hold, Min Hold, Average, # of Averages. Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS. Markers: 6, each with a Delta Marker, or 1 Reference with 6 Deltas. Limit Lines: up to 40 segments with one-button envelope creation. Resolution Bandwidths: from 1 Hz to 10 MHz. LTE Measurements up to 20 MHz. Options. 0007, Secure Data Operation. 0019, High-Accuracy Power Meter (requires Power Sensor). 0031, GPS Receiver (requires Antenna P/N 2000-1528-R or 2000-1652-R). 0025, Interference Analyzer (recommend Option 31). 0027, Channel Scanner. 0089, Zero-Span IF Output. 0431, Coverage Mapping (requires Option 31). 0509, AM/FM/PM Analyzer. 0090, Gated Sweep. 0009, I/Q Demodulation Hardware. 0024, I/Q Waveform Capture.