BRL Test, Inc.

Electronic Test Equipment

Below Budget - On Time - Above Expectations

Manufacturers

Testimonials

  • ★★★★★

    "Fantastic deal. The oscilloscope is in very good condition. Packed for shipment to survive anything"
    Jeff
  • ★★★★★

    "Premium equipment. Excellent communication. Fast. Best value!"
    Avi
  • ★★★★★

    "Practically in new condition"
    Darcy
  • ★★★★★

    "There was a small issue; The people at BRL Test were 100% responsive and issue resolved. Thanks!"
    Mike
  • ★★★★★

    "Best packing ever! I would let you ship one of my children!"
    Todd
  • ★★★★★

    "Unit received in great shape. Passed Agilent calibration. Good job!!"
    Lee
  • ★★★★★

    "In every aspect these guys are great!"
    Sarah

Join our Newsletter

See the Videos

AL-RS101-SET with TX and RX - Com-Power Antennas

$1,225.00

  • Model: AL-RS101-SET with TX and RX
  • Manufactured by: Com-Power
  • Extra Specifications: RF currents as high as 15 amperes; corresponding to a maximum magnetic flux density of 1.42x109 pico Tesla or 183.1 dBpT; [9.49x107 pT/ Ampere] at a distance of 5 cm
 

Com_Power AL-RS101-SET of Loop Antennas: AL-RS101-TX Transmitting and AL-RS101-RX Receiving

BRL Test is your Com-Power authorized distributor.

The AL-RS101-TX is a transmitting loop antenna constructed with 20 turns of 12 gauge enamel-insulated copper wire with a mean diameter of 12 cm. The Teflon (PTFE) structure onto which the wire is wound is elongated in order to provide the required 5 cm spacing between the loop coils and the Equipment Under Test
(EUT) when the antenna is placed  flush against the EUTsurface as shown to the left.  The antenna input terminals are fitted with 4 mm banana jacks.  
The AL-RS101-TX also incorporates a mechanism for mounting the ALRS101-RX antenna into the exact required position for calibration of test levels, with the required 5 cm spacing between the loops.  The antenna is capable of handling RF currents as high as 15 amperes; corresponding to a maximum magnetic flux density of 1.42x109 pico Tesla or 183.1 dBpT; [9.49x107  pT/ Ampere] at a distance of 5 cm. The AL-RS101-RX is a receiving loop antenna used during RS101 test level calibration to measure the magnetic field intensity generated by the AL-RS101-TX transmit loop.  Its construction consists of a 51-turn, electrostatically shielded coil of 7-strand, 41 gauge Litz wire. The antenna output port is fitted with a female BNC connector.

Items can be sold separately call 407-682-4228.



 
Your IP Address is: 3.85.245.126