BRL Test, Inc.

Electronic Test Equipment

Below Budget - On Time - Above Expectations

Manufacturers

Testimonials

  • ★★★★★

    "Fantastic deal. The oscilloscope is in very good condition. Packed for shipment to survive anything"
    Jeff
  • ★★★★★

    "Premium equipment. Excellent communication. Fast. Best value!"
    Avi
  • ★★★★★

    "Practically in new condition"
    Darcy
  • ★★★★★

    "There was a small issue; The people at BRL Test were 100% responsive and issue resolved. Thanks!"
    Mike
  • ★★★★★

    "Best packing ever! I would let you ship one of my children!"
    Todd
  • ★★★★★

    "Unit received in great shape. Passed Agilent calibration. Good job!!"
    Lee
  • ★★★★★

    "In every aspect these guys are great!"
    Sarah

Join our Newsletter

See the Videos

CGO-520 - Com-Power Comb Generators

$2,780.00

  • Model: CGO-520
  • Manufactured by: Com-Power
  • Extra Specifications: New in box.
 

Com-Power CGO-520

BRL Test is your authorized Com-Power distributer.
Com-Power CGO-520 Comb Generators is a broadband EMC signal source for quick EMC site testing. It radiate signals up to 4.5 GHz at 20 MHz frequency steps. EMC labs calibrate their radiated emissions test sites, instrumentation and accessories at least once a year. The calibration procedures are elaborate and time consuming. However, calibration does not prevent equipment malfunction in between calibration period such as damaged receivers, broken cables, poor connections, bad antenna, etc. Monitoring a few frequencies regularly on the Comb Generator's broadband radiated output can verify the entire setup quickly and efficiently. Any potential problems with the test setup can be detected before it causes erroneous results. It is powered by a rechargeable NimH battery pack. It has circular shape for more uniform radiated output. It is supplied with two detachable antennas.

The CGC series Comb Generator was specifically designed to test installed Line Impedance Stabilization Networks (LISNs). LISNs are used for EMC conducted emissions testing according to FCC Part 15, CISPR, and EN requirements. The Comb Generator output is connected to the LISN EUT power port and measurements are taken similar to an EUT. For convenience, the CGC series Comb Generators have 3 prong standard US plug for LISNs with matching EUT power socket. By using the Comb Generator the test engineer can quickly identify any problems with the conducted setup before making any measurements with an EUT. the Application Note AN-104 provides more details on the Comb Generator.

Comb Generators for Testing Radiated Emissions Sites

MODELSTEP SIZEFREQUENCY
CGO-5011 MHz1 -1000 MHz
CGO-5055 MHz5 -1500 MHz
CG-5151 & 5 MHz1 - 1500 MHz
CGO-5151 & 5 MHz1 -1500 MHz
CGO-52020 MHz20-4500 MHz
CGO-5100A100 MHz1 - 18 GHz
CGO-510001000 MHz1 - 34 GHz

Comb Generators for Testing Setups with Line Impedance Stabilization Networks (LISNs)

MODELSTEP SIZEFREQUENCY
CGC-25550 & 250 kHz50 kHz - 30 MHz
CGC-510100 & 500 kHz100 kHz - 30 MHz
Your IP Address is: 100.24.209.47